Hurstville Commercial Kitchens
Seamless non-slip epoxy with sand-filled coving carried up the wall. Hygienic, hoseable and built for a floor that gets cleaned every night. Free on-site assessments across Hurstville and the rest of St George.
- Build thickness
- 4–9 mm
- Coving height
- 100–150 mm
- Finish
- Non-slip, wet and greasy areas
- Thermal range
- −40 to 120 °C
Commercial Kitchens done properly in Hurstville
If you are in Hurstville or anywhere else in St George, the assessment is free and we will tell you straight if the slab is not worth coating.
A kitchen floor has to survive hot oil, steam cleaning, dropped pans and a hose at 4am. We lay a heavy-duty non-slip epoxy or urethane system and — the part that matters most — form a sand-filled cove where the floor curves up into the wall.
That curved cove is what makes the floor hygienic. There is no square junction for grease and water to sit in, nowhere for a mop to miss, and nothing for an auditor to write up. We take the cove up 100 to 150 mm and terminate it under the wall sheet or against a stainless capping.
Commercial Kitchens in Hurstville: what to know locally
Hurstville sits in the Georges River Council area: units around the centre and older homes on sloping streets. That shapes how we approach commercial kitchens here.
Basement and car-park work often needs after-hours scheduling and building-manager approval, which we arrange. Older commercial slabs often have oil, previous coatings and damage that need grinding and repair first. Sloping sites and loading docks need the right falls and anti-slip finish for forklifts and wet boots.
We also quote in nearby Kogarah and Rockdale, so one visit to St George can cover several jobs.
What is included
- Sand-filled coving formed at every floor-to-wall junction
- Seamless — no grout lines, no joints to harbour grease
- Non-slip finish rated for wet and greasy areas
- Falls to floor wastes checked and corrected
- Withstands steam cleaning and thermal shock
- Works staged overnight around service
The specification
| Build thickness | 4–9 mm |
|---|---|
| Coving height | 100–150 mm |
| Finish | Non-slip, wet and greasy areas |
| Thermal range | −40 to 120 °C |
| Return to service | 24–48 hours |
How the job runs in Hurstville
- We come to Hurstville, measure the area, moisture-test the slab and photograph anything that needs repair.
- You get a written quote within two business days with preparation, repairs and coats itemised separately.
- On day one we diamond-grind the surface back and cut out the cracks, with dust extraction running throughout.
- The system goes down in coats, each one checked with a wet film gauge before the next.
- We hand back a clean floor with the colour, batch numbers and cure times written down for your records.
Questions we get in St George
What is coving and do I need it?
Coving is a curved fillet of sand-filled resin where the floor sweeps up into the wall instead of meeting it at a square corner. In any food handling area you want it — it removes the crevice that grease and water collect in and it is the first thing an auditor looks for.
Can you work around service hours?
Yes. Kitchen work is almost always staged overnight or across a shutdown so you are trading the next day.
Will it handle steam cleaning?
Yes. The urethane systems we use for kitchens tolerate thermal shock from −40 °C to 120 °C, which covers steam cleaning and cold room thresholds.
How soon can you look at my job in Hurstville?
Usually within two or three business days. The assessment takes about 45 minutes — we measure up, probe the slab for moisture and photograph any cracks — and the written quote follows within two business days of that.
Commercial Kitchens near Hurstville
We cover St George and the surrounding areas. Same crew, same preparation standard, no travel loading inside the metro area.
Commercial Kitchens in Hurstville — Book Your Free Assessment
Tell us about the job and we'll come back with a price. The on-site assessment is free.
Or call 0470 347 292 ↗Mon–Sat, 6:30am–5pm