Marrickville Patios & Alfresco
Servicing Marrickville 2204 and the surrounding Inner West. Tired patios, alfresco areas and paths resurfaced to match the house, without the cost and mess of ripping the slab out.
- Build thickness
- 2–4 mm
- Finish
- Stencil, slate or plain
- Foot traffic
- 24 hours
- Furniture back
- 72 hours
Patios & Alfresco done properly in Marrickville
If you are in Marrickville or anywhere else in Inner West, the assessment is free and we will tell you straight if the slab is not worth coating.
Outdoor concrete ages badly. Once it is stained, patched and mismatched with the house, a resurface brings the whole area back in two or three days for a fraction of what replacement costs.
We colour-match to your brickwork, render or decking, and carry the finish through the paths and steps so the yard reads as one surface instead of four different pours from four different decades.
Patios & Alfresco in Marrickville: what to know locally
Marrickville sits in the Inner West Council area: a mix of workshops, warehouses and terrace houses. That shapes how we approach patios & alfresco here.
Trade vehicles and heavy turning leave oil and scuffing, so we select a tougher finish for hard-working drives. Courtyards and laneways here are tight, so we plan access, masking and neighbours before arriving. Older brick-home slabs tend to be oil-stained, pitted or worn, which is exactly what a resurfacing system hides and protects.
We also quote in nearby Alexandria, Newtown, Leichhardt and Burwood, so one visit to Inner West can cover several jobs.
What is included
- Colour matched to the house, not a catalogue guess
- Patios, alfresco areas, paths and steps in one job
- Stencil, slate or plain broom-texture finishes
- Non-slip sealer suited to outdoor use
- Existing expansion joints carried through
- Minimal disruption, no slab removal
The specification
| Build thickness | 2–4 mm |
|---|---|
| Finish | Stencil, slate or plain |
| Foot traffic | 24 hours |
| Furniture back | 72 hours |
| Typical job | 2–3 days |
How the job runs in Marrickville
- We come to Marrickville, measure the area, moisture-test the slab and photograph anything that needs repair.
- You get a written quote within two business days with preparation, repairs and coats itemised separately.
- On day one we diamond-grind the surface back and cut out the cracks, with dust extraction running throughout.
- The system goes down in coats, each one checked with a wet film gauge before the next.
- We hand back a clean floor with the colour, batch numbers and cure times written down for your records.
Questions we get in Inner West
Can you match it to my house?
That is the usual brief. We take the colour off your brick, render or decking at the assessment rather than picking from a chart in isolation.
What about the expansion joints?
They get carried through the new surface, never bridged. Coating over a movement joint is how a resurface ends up cracked in a straight line twelve months later.
Can you do the paths and steps too?
Yes, and it is worth doing at the same time. Doing the patio alone tends to make the adjoining path look worse than it did before.
How soon can you look at my job in Marrickville?
Usually within two or three business days. The assessment takes about 45 minutes — we measure up, probe the slab for moisture and photograph any cracks — and the written quote follows within two business days of that.
Patios & Alfresco near Marrickville
We cover Inner West and the surrounding areas. Same crew, same preparation standard, no travel loading inside the metro area.
Patios & Alfresco in Marrickville — Book Your Free Assessment
Tell us about the job and we'll come back with a price. The on-site assessment is free.
Or call 0470 347 292 ↗Mon–Sat, 6:30am–5pm