Warehouse Floors — Rockdale, NSW
Servicing Rockdale 2216 and the surrounding St George. Solid colour epoxy build coats for distribution centres, factories and storage facilities, staged around your operating hours.
- Build thickness
- 300–600 µm
- Traffic
- Forklift rated
- Return to service
- 24–48 hours
- Line marking
- Included
Warehouse Floors across Rockdale and St George
Rockdale sits inside our standard service area in St George, which means no travel loading on the quote and no minimum job size beyond a single bay or plant room.
Warehouse floors fail at the joints and the traffic lanes first. We grind the slab, reinstate the saw cuts properly, repair spalled edges, then lay a solid colour epoxy build coat at 300 to 600 microns with line marking set out to your rack plan.
The work is staged. Most of our commercial jobs run nights and weekends section by section, so racking comes down and goes back up in bays and the site keeps picking through the week.
Warehouse Floors in Rockdale: what to know locally
Rockdale sits in the Bayside Council area: low-lying streets near Botany Bay and the airport corridor. That shapes how we approach warehouse floors here.
Older commercial slabs often have oil, previous coatings and damage that need grinding and repair first. Coastal premises face salt air and damp, so we choose coatings and sealers that cope with moisture and regular washdowns. Flat industrial slabs are straightforward to grind and coat, with attention to joints and drainage.
We also quote in nearby Hurstville and Kogarah, so one visit to St George can cover several jobs.
What is included
- Staged works — nights, weekends, bay by bay
- Diamond grinding with HEPA dust extraction
- Joint reinstatement and spalled edge repair
- Solid colour epoxy or non-slip broadcast finish
- Aisle, walkway and bay line marking to your plan
- Compliance pack for the building file
The specification
| Build thickness | 300–600 µm |
|---|---|
| Traffic | Forklift rated |
| Return to service | 24–48 hours |
| Line marking | Included |
| Recoat | Year 7–10 |
How the job runs in Rockdale
- We come to Rockdale, measure the area, moisture-test the slab and photograph anything that needs repair.
- You get a written quote within two business days with preparation, repairs and coats itemised separately.
- On day one we diamond-grind the surface back and cut out the cracks, with dust extraction running throughout.
- The system goes down in coats, each one checked with a wet film gauge before the next.
- We hand back a clean floor with the colour, batch numbers and cure times written down for your records.
Questions we get in St George
Can you work without shutting us down?
Yes. Staged night and weekend works are how most of our warehouse jobs run. We coat in sections, hand back a trafficable floor each morning and move to the next bay.
How much dust does the grinding make?
Grinders run on HEPA-filtered extraction so airborne dust is minimal, though it is never zero. We mask off adjoining areas and racking that stays in place.
Do you do the line marking as well?
Yes, set out to your rack plan — aisles, walkways, bay numbers, hatching and exclusion zones.
Do you service Rockdale?
Yes. Rockdale 2216 is inside our standard service area in St George, along with the surrounding suburbs. There is no travel loading on quotes inside the Sydney metro area, and regional jobs are quoted with a clearly itemised mobilisation allowance.
Warehouse Floors near Rockdale
We cover St George and the surrounding areas. Same crew, same preparation standard, no travel loading inside the metro area.
Warehouse Floors in Rockdale — Book Your Free Assessment
Tell us about the job and we'll come back with a price. The on-site assessment is free.
Or call 0470 347 292 ↗Mon–Sat, 6:30am–5pm