Toongabbie Warehouse Floors
Solid colour epoxy build coats for distribution centres, factories and storage facilities, staged around your operating hours. We quote Toongabbie jobs after we have seen the slab, never over the phone.
- Build thickness
- 300–600 µm
- Traffic
- Forklift rated
- Return to service
- 24–48 hours
- Line marking
- Included
Warehouse Floors done properly in Toongabbie
If you are in Toongabbie or anywhere else in Western Sydney, the assessment is free and we will tell you straight if the slab is not worth coating.
Warehouse floors fail at the joints and the traffic lanes first. We grind the slab, reinstate the saw cuts properly, repair spalled edges, then lay a solid colour epoxy build coat at 300 to 600 microns with line marking set out to your rack plan.
The work is staged. Most of our commercial jobs run nights and weekends section by section, so racking comes down and goes back up in bays and the site keeps picking through the week.
Warehouse Floors in Toongabbie: what to know locally
Toongabbie sits in the Cumberland City Council area: quiet streets of 1960s–70s brick homes with long driveways and single or double garages. That shapes how we approach warehouse floors here.
Older commercial slabs often have oil, previous coatings and damage that need grinding and repair first. Flat industrial slabs are straightforward to grind and coat, with attention to joints and drainage.
We also quote in nearby Parramatta, Merrylands, Granville and Auburn, so one visit to Western Sydney can cover several jobs.
What is included
- Staged works — nights, weekends, bay by bay
- Diamond grinding with HEPA dust extraction
- Joint reinstatement and spalled edge repair
- Solid colour epoxy or non-slip broadcast finish
- Aisle, walkway and bay line marking to your plan
- Compliance pack for the building file
The specification
| Build thickness | 300–600 µm |
|---|---|
| Traffic | Forklift rated |
| Return to service | 24–48 hours |
| Line marking | Included |
| Recoat | Year 7–10 |
How the job runs in Toongabbie
- We come to Toongabbie, measure the area, moisture-test the slab and photograph anything that needs repair.
- You get a written quote within two business days with preparation, repairs and coats itemised separately.
- On day one we diamond-grind the surface back and cut out the cracks, with dust extraction running throughout.
- The system goes down in coats, each one checked with a wet film gauge before the next.
- We hand back a clean floor with the colour, batch numbers and cure times written down for your records.
Questions we get in Western Sydney
Can you work without shutting us down?
Yes. Staged night and weekend works are how most of our warehouse jobs run. We coat in sections, hand back a trafficable floor each morning and move to the next bay.
How much dust does the grinding make?
Grinders run on HEPA-filtered extraction so airborne dust is minimal, though it is never zero. We mask off adjoining areas and racking that stays in place.
Do you do the line marking as well?
Yes, set out to your rack plan — aisles, walkways, bay numbers, hatching and exclusion zones.
How soon can you look at my job in Toongabbie?
Usually within two or three business days. The assessment takes about 45 minutes — we measure up, probe the slab for moisture and photograph any cracks — and the written quote follows within two business days of that.
Warehouse Floors near Toongabbie
We cover Western Sydney and the surrounding areas. Same crew, same preparation standard, no travel loading inside the metro area.
Warehouse Floors in Toongabbie — Book Your Free Assessment
Tell us about the job and we'll come back with a price. The on-site assessment is free.
Or call 0470 347 292 ↗Mon–Sat, 6:30am–5pm